D
Please click onto the image to return to the item.
This is an image of the earlier style - we will update
the image when IOTA releases it.
Please click on image to return to our IOTA battery charger page.
The controller must be ordered with a voltage to match
the charger.
You can click onto either image to return to
our cathodic protection page.
This stand-alone photovoltaic cathodic
protection system saved approximately 95%
of the cost of a utiltiy powered set-up.
As it did not require trenching for incoming
power there was not interruption in the
surrounding operations.
mod. 162 and P262
Please click on the image to return to this item
on our Thin-Lite outdoor lighting page.
mod. 163 and P263
Please click on the image to return to this item
on our Thin-Lite outdoor lighting page.
mod. 167 and P267
Please click on the image to return to this item
on our Thin-Lite outdoor lighting page.
VFI 30-PT and VFI 230-PT
Please click on the image to return to this item
on our Thin-Lite outdoor lighting page.
RFI suppressed Thin-Lite ballast
Your ballast may look different as different models
of Thin-Lites have different wiring set-ups.
The P ballast has two transistors on the end of the
board under the pop-riveted aluminum angle as
shown on the left end of the ballast.
Please click on the image to return to this item
on our Thin-Lite replacement ballast page.
Please click onto image to return to the IQ4.
Please click onto image to return to the IQ4.
mod. 622
Please click onto the image to return to this item on our Thin-Lite page.
Thinlite mod. 622 fluorescent light 12 volt d.c.
16 watts (uses 1.4 amps)
800 lumens - Very popular with paintless dent repair shops.
Uses two F8T5/CW fluorescent tubes - included.
Dimensions: 13.95" long by 5.56" wide by 1.51" thick.
We no longer stock this light but can special order them for you.
For pricing and lead time please click onto the following link:
622 and 626 lights
mod. 626 and P626BX
Please click onto the image to return to this item on our Thin-Lite page.
Thinlite mod. 626 fluorescent light - 12 volt d.c.
30 watts (uses 2.2 amps)
1650 lumens
Uses two F15T8/CW fluorescent tubes - included.
Dimensions: 19.67" long by 5.56" wide by 1.51" thick.
For the Thin-Lite led version of this light, which we do stock, please click onto this link: LED 626P
We no longer stock this light but can special order them for you.
For pricing and lead time please click onto the following link:
622 and 626 lights
mod. 656
Please click onto the image to return to this item on our Thin-Lite page.
Thinlite mod. 656 fluorescent light - 12 volt d.c.
30 watts (uses 2.2 amps)
1650 lumens
Uses two F15T8/CW fluorescent tubes - included.
Dimensions: 22.652" long by 7.30" wide by 1.56" thick.
We no longer stock this model, for special order pricing and
information please click on the following link:
For the Thin-Lite led version of this light please click onto this link:
Canadian customers:
A note to our Canadian neighbors.
Due to the higher fees charged to us by the
credit card processors, we can no longer
accept credit cards with a Canadian billing
address.
sincerely,
John
Orders to Puerto Rico.
Orders received with a ship to street address in Puerto Rico
will be checked with the US Postal Service data base.
If the Post Office does not show a zip + 4 address, we will
cancel the order.
A large percentage of orders shipped to street addresses in
Puerto Rico are being returned by the U.S. Postal Service.
We have been refunding the orders and taking a loss on the
postage fees.
We can no longer do this.
John
Please use the back button on your browser to return
to the page you were visiting.