31 Water and Air Heating Diversion Loads for Charge Controllers

31 Water and Air Heating Diversion Loads for Charge Controllers

We stock both water and air heating diversion loads for alternative

energy systems.

Wind power and hydro power, as well as some solar (photovoltaic) charge

controllers require a diversion load to accept the power that is being produced

when the batteries are full.

A diversion load will accept and use that power to keep wind and hydroelectric

generators from overspeeding when the power produced is not needed by

the batteries.

With solar - wind - micro hydro charge controllers, like the Flexcharge NC25A and NCHC ,

Trace C - Series, Morningstar Tri-Star and others.

This will allow you to use energy which would otherwise be wasted when not

needed by the batteries.

These loads also work well with the older Burkhardt and Enermaxer diversion type

charge controllers.

Water Heater Diversion Loads:

You can use one or more of these to turn your excess power into hot water.

With a 1" NPT mount they will fit into most electric water heater tanks that

use screw-in elements.

These are two element heating loads so you can also use half of the rated

wattage to match the load to your system.

Please choose one that matches your system output voltage and wattage.

If you have any questions, please feel free to call us at:

(562) 423-4879

We carry air and water heating diversions loads in

12 volt , 24 volt and 48 volt.

The following water heating diversions loads are

instock items and ship daily from our inventory.

We ship every weekday.

Back to Top

1) 12 or 24 volt d.c. 600 watt diversion heating load.

Draws 50 amps at 12 volts and 25 amps at 24 volts.

2) 24 or 48 volt d.c. 900 watt diversion heating load.

Draws 60 amps at 24 volts and 30 amps at 48 volts.

For more information and ratings on these water heating

diversion loads the following link will take you to the bottom

of this page: Water heating diversion load chart.

PRICE:

Diversion load for 12 or 24 volt - 600 watts

This istem is limited to stock on hand.

Currently we have 1 in stock.

( WAT LOAD - 12/24 ) $ 110.00 each

The following Verisign / Go eMerchant Add To Cart button offers several

shipping options based on the order weight and your zip code.

PRICE:

Diversion load for 24 or 48 volt - 900 watts

This istem is limited to stock on hand.

Currently we have 1 in stock.

( WAT LOAD - 24/48 ) $ 90.00 each

The following Verisign / Go eMerchant Add To Cart button offers several

shipping options based on the order weight and your zip code.

______________________________________________

Square flange to round threaded adapter.

If your water heating tank has a square hole that accepts four

bolts and a square flange you will need this adapter to mount

the water heating element.

PRICE: ( SQUARE TO ROUND ) $ 12.50 each

The following Verisign / Go eMerchant Add To Cart button offers several

shipping options based on the order weight and your zip code.

____________________________________________________

Flexcharge water heating diversion load pad for hot

water tanks.

7" by 5".

12 volt / 30 amp / 370 watt

Can be used in series for 24 volt systems.

Can also be paralleled to increase amp ratings.

For use on a Metal water tank with a radius of 10" (20" diameter)

or greater.

The self-adhesive back makes this especially well suited for

use on boats where you do not want to either use an outlet

or make a hole in the metal water heater tank.

These can also be attached to the inside of a Metal boat hull.

The kit includes: diversion load pad, a sheet of sandpaper to

clean the tank, silicone sealer, plastic spreader for the sealer,

wire ties and instructions.

Currently we have 1 in stock.

PRICE: ( DIVERSION PAD ) $ 100.00 each

The following Verisign / Go eMerchant Add To Cart button offers several

shipping options based on the order weight and your zip code.

____________________________________________________

Back to Top

Air Heater Diversion Loads:

You can use one or more of these to turn your excess power into heated

air.

We have been using an air heating diversion load on one of our systems

here since 1986.

The following air heating diversion load is an

instock item and ships daily from our inventory.

Ohmite heating load:

12 volt d.c. 300 watt (.50 ohm) air heating diversion load made in

the U.S. by OHMITE.

Model # C300KR50E.

Watts: 300

Ohms: 0.5

Also known as a Vitreous Enameled Resistor.

These loads can be wired in series to increase voltage or parallel

to increase amperage.

Mounting feet are included with each unit as seen in the picture above.

A simple way to utilize excess power from a solar array, wind generator

or hydro-electric generator.

For the most efficient operation, they should be mounted vertically to

take advantage of the convection movement of the air when they heat up.

You can wire multiple units together in series or parallel or

series/parallel to get any combination of voltage and amperage

you need.

Length = 8.5"

Always mount on a non-combustable surface.

This item is RoHS compliant.

PRICE: ( C300KR50E ) $ 32.50 each

Currently we have 11 in stock.

Quantity pricing is ONLY available using the following shopping

cart.

1 to 2 Ohmite heating loads are $ 32.50 each

3 to 4 Ohmite heating loads are $ 30.50 each

5 or more Ohmite heating loads are $ 28.50 each

The following Verisign / Go eMerchant Add To Cart button offers several

shipping options based on the order weight and your zip code.

Water heating diversion load chart.

12/24 volt model:

Regulation Voltage >

14.00

28.00

Wiring

Ohms

Amps

Watts

Amps

Watts

series	0.96	14.6	204	29.2	817
single	0.48	29.2	408
parallel	0.24	58.3	817

back to water heating diversion loads

24/48 volt (also 12 volt) model:

Regulation Voltage >

14.00

28.00

56.00

Wiring

Ohms

Amps

Watts

Amps

Watts

Amps

Watts

series	2.48	5.6	79	11.3	316	22.6	1265
single	1.24	11.3	158	22.6	632
parallel	.62	22.6	318	45.2	1265

back to water heating diversion loads

Back to Top

The black "add to cart" button charges shipping

cost based on the weight of your order and your

zip code - it offers six shipping options.

The PayPal Shopping Cart shipping rates are shown

in the following table.

With the exceptions of items which show a flat shipping

rate, the PayPal shipping costs are based on the

amount of your order and only offer ground shipping.

$ 0.01 - 9.99	$ 7.00
$ 10.00 - 34.99	$ 8.25
$ 35.00 - 99.00	$ 10.00
$ 100.00 - 199.99	$ 16.00
$ 200.00 and over	$ 17.00

96 Order Form Contact Us

Back to Top

Previous Page Home Page Next Page

How to order:

1) You can securely order on-line using the

button to

pay using Mastercard, Visa, Discover, American Express,

an e-check (electronic check from your checking account) or

if you already have a PayPal account - from the funds in your account.

2) You can also securely order on-line using the

button

provided by and Go e-Mercant to pay using

Mastercard, Visa, Discover and American Express.

You will need to let your browser accept cookies to use this

cart.

The Verisign cart offers: Priority Mail, UPS Ground, UPS 3 Day,

UPS 2nd Day and UPS Next Day Air Saver shipping options

based on the shipping weight and your zip code.

3) We accept telephone and fax orders and accept Mastercard, Visa

and Discover.

4) Checks and money orders are gladly accepted by mail.

You can print out the order form on our website or just list the description

and catalogue numbers of the items you need.

Back to Top